MC 1062 is designed to clean machines, lines, tanks, and all associated equipment that have collected contaminants in the form of various soils, water insolubles, metallic fines, grits, and bio-films.
It is strongly recommended that machines and systems are properly cleaned prior to charging with fresh coolant. If machines are free of dirt and bacteria, conditions are optimized for supporting an efficient, long lasting coolant – a prime requirement with today’s high performance machinery.
|DR Product||FC 938W-LF||MC 1062||Oil Dri|
BENEFITS MC 1062 is a powerful liquid cleaner that:
- solubilizes hard water soaps that have accumulated on the surfaces
- chemically loosens dirt and grease from inaccessible areas
- breaks up metal deposits in machine lines and sumps
- disinfects machines by killing bacteria and fungi
MC 1062 may be used in either of the following methods:In Process Cleaning:
MC 1062 may be added to the machine while the operators continue to work. MC 1062 should be added to the dirty coolant at a 1% dilution and circulated for a period of 12-hours.Shut Down Cleaning:
After draining the dirty coolant and refilling the machine or systems with water, MC 1062 may be added at a dilution of 2% – 3%.
Slight rinsing may be required after each method. All chips and contaminants should be removed before recharging with fresh coolant.TYPICAL PHYSICAL AND CHEMICAL PROPERTIES FOR MC 1062
- PHYSICAL STATE: LIQUID
- COLOR: AMBER
- ODOR: CHEMICAL
- SPECIFIC GRAVITY: 1.040
- pH CONCENTRATE: 9.0-9.5
- pH 5%: 8.8-9.3
- NITRATES: NONE
- PHOSPHATES: NONE
- FOAM TEST: PASS